Elpro Technologies 105U-G Specifications download pdf (Page 40)

Application Note 105U-G-PR2 Profibus Master

Issue 1.2 – May 2005

©ELPRO Technologies Pty Ltd

Page 2 of 13

app_105U-G_PR2_1.2.doc

comes with the Slave device (In this case the ET200S). This GSD file has the I/O map for the

installed Profbus Slave device and is needed by the software to workout what sort of I/O is

available and the addressing.

Next find the Slave device in the left hand tree window of the Profibus Network Configuration

window. Right click the device being used and select add to network or drag and drop the module

onto the network line as shown below. The module can only be added to the network line.

Next Double click on the Siemens ET200S (or other Slave device) to adjust available network

settings. See below.

This is were you can set the Profbus Slave address (Address will need to match the Profibus Slave

Device.

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 65 66

No comments

Elpro Technologies 105U-G Specifications Page 40